Description

🛠【Tiling Tools Application 】 You could get 50 Sets/Bag tile spacers + 1Pcs Tool. tile leveling system Designed to keep the tile balance on the same horizontal position; floor tiles great for preventing tiles from moving while curing.Virtually lippage-free, flat surface drastically. Reduces the need for grinding and polishing. Prevents tiles from moving while curing.
🛠【High Quality & Resistant】 Made from semi-crystalline thermoplastic with high impact resistance and the 430 Steel steel part is made from stainless steel with a thickness of 1.4 mm, allowing you to use them with 1.5 mm up to 2.5 mm plastic spacers.
🛠【Reusable & Durable】 Save a lot of money by using them again and again; after the tiles are set, simply twist the screws anticlockwise and remove the main anchor, you may need to hammer it gently. Wear-resistant, reusable.Easy to use for DIY operation. Keep the tile balance in the same horizontal position. Improve tile installation speed. Reduce installer fatigue/stress.
🛠【Using Tips】Paving the first tile, leave more than 2mm (use with cross spacer). Close to the tiles. Insert a T-shaped needle along the gap in the tile. Then 180-degree rotation, T-shaped needle stuck at the bottom of the two tiles. Adjust the caps with your hand/special wrench until the two tiles are on the same level. About 5-6 hours after leveling, Before cement/adhesive is completely dry, rotate caps in the reverse direction, remove 180° T-needle until the word, take out.
🛠【Suitability】 Unlike the normal leveling wedges and pliers, this new system doesn’t require any tools unless you need to tighten very hard, and the special wrench is included. It is easy enough to fix or remove with the wrench to improve tile installation speed. Suitable for 3 mm to 16 mm thickness of the tile, but can be used with tiles up to 18 mm thickness, suitable Spacer: 2mm-8mm Spacer.