Free shipping New Leadshine DM556 2-phase Digital Stepper Drive work 36-60 VDC 2.1A to 5.6A for Associated products NEMA23 motor

Free shipping New Leadshine DM556 2-phase Digital Stepper Drive work 36-60 VDC 2.1A to 5.6A for Associated products NEMA23 motor and NEMA34 motor

Ha Ha 2015 Happy Chinese new year ,new price and new surprised .

our store have many types of motion control products, including CNC products, if you are willing, please tell us what you need, we will find it for you , Until you are satisfied . we also have the technical Support ,so if you have any question ,please let us know ,then we can take the value suggest for you , thanks

Features :

• Anti-Resonance, provides optimum torque and nulls mid-range instability
• Motor self-test and parameter auto-setup technology, offers optimum responses with different motors
• Multi-Stepping allows a low resolution step input to produce a higher microstep output for smooth system performance
• Microstep resolutions programmable, from full-step to 102,400 steps/rev
• Supply voltage up to +50 VDC
• Output current programmable, from 0.5A to 5.6A
• Pulse input frequency up to 200 KHz
• TTL compatible and optically isolated input
• Automatic idle-current reduction
• Suitable for 2-phase and 4-phase motors
• Support PUL/DIR and CW/CCW modes
• Over-voltage, over-current, phase-error protections

Introduction :

The DM556 is a versatility fully digital stepping drive based on a DSP with advanced control algorithm. The DM556 is the next generation of digital stepping motor controls. It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability. Motor self-test and parameter auto-setup technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drives in the markets. Its unique features make the DM556 an ideal solution for applications that require low-speed smoothness.

Compared to the DM432C, broader input voltage and output current ranges make the DM556 can drive much more motors than the DM432C. What’s more, owing to its higher performance DSP, driven motors can achieve much higher speed (above 3000RPM) than that of the DM432C, offering servo-like performances.

Specifications :

1. General

Electrical Specifications (T_j = 25^oC/77^oF)

2 Connector Configuration :

Connector P1 Configurations

Connector P2 Configurations

3 Microstep&Current :

Selecting Microstep Resolution and drive Output Current

Microstep resolutions and output current are programmable, the former can be set from full-step to 102,400 steps/rev and the latter can be set from 0.5A to 5.6A.
However, when it’s not in software configured mode, this drive uses an 8-bit DIP switch to set microstep resolution, and motor operating current, as shown below:

Microstep Resolution Selection

When it’s not in software configured mode, microstep resolution is set by SW5, 6, 7, 8 of the DIP switch as shown in the following table:

Current Settings

When it’s not in software configured mode, the first three bits (SW1, 2, 3) of the DIP switch are used to set the dynamic current. Select a setting closest to your motor’s required current.

Note: Due to motor inductance, the actual current in the coil may be smaller than the dynamic current setting, particularly under high speed condition.

Typical Connection :

Mechanical Specifications (unit: mm [inch]) :

1.Payment .

1 We accept Alipay,,West Union, TT . All major credit cards are accepted through secure payment processor ESCROW .

2 Payment must be made within 3 days of order.

3 If you can’t checkout immediately after auction close , please wait for a few minutes and retry Payments must be completed within 3 days .

2.Shipment .

1.we accepted WORLDWIDE SHIPPING . (Except some countries and APO/FPO)

2. Orders processed timely after the payment verification .

3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address .

4. The images shown are not the actual item and are for your reference only .

5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season .

6. If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction .

7. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery .

3 Return Policy .

1.The buyer has 7 days to return the item (the buyer pays shipping fees). Money-back guarantee!

2. We will offer a full refund/free exchange if the item is DOA(dead on arrival) or defective upon recieving the package. If the item is not defective, buyer must pay 10% restocking fee plus shipping fee for return/exchange.

3. After 1 month while within 1 year: no return allowed, buyer will be responsible for all warranty shipping & handling to our Hong Kong Customer Service Support.

4. Defective products must be returned within 14 days from the date report the problem.

5. It may take up to 7 business days to process your return after we receive your product.

6. All products have 1 year warranty .

4. Feedback .

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

It is impossible to address issues if we do not know about them .