2 square meters infrared heating film 50 cm*4 m with accessories clamps (clips) and insulating daub and black tap

Attractive Feature: Safety – Environment Friendly – Silent.

Use Place: Home – Office – Hotel – Warehouse – Gym -Greenhouse…

_______________________________________________________________

Packing Includ:

Floor Heating Film 0.5M*4M;

Clamps x 5pcs;

Length 50cm Water Proof Insulating daub x 1roll;

Black Insulating tap x 1roll.

_______________________________________________________________

Infrared Electric Heating Film Specification Data:

Electric Heating Film Size:

Installation Method For Different Finishing Materials:

_______________________________________________________________

Power consumption of heating film:

1, Electric film rated power is 220W/Square meter.

2, Means full loading: 0.2 kWh.

3, Paved area of 70% of the room can achieve heating requirements.

4, Installed electric film heating system, are relying thermostat control, intermittent work to make the room temperature is maintained constant.

5, When the room reaches the set temperature, the thermostats will enter standby mode.

6, According to the test, when the outdoor temperature is -6 degrees Celsius,

the indoor temperature want to maintain at 20 degrees Celsius, under the control

of the thermostat, electric film per day per square meter of actual working time is 4-8 hours.

Saving essentials:

1). An electrical heating system of the room to do better warm insulation electric film actual working time will be shorter, thereby reducing power consumption. It is more conveninet than the boiler and more environmentally friendly.

2) Install thermostats in each room, separate control. Close heating film when no body in the room, thereby reducing the working area, to save power. It is the same principle with central air condition, but more conmfortable.

_______________________________________________________________

Installation Method

Floor Heating thermostat:

Toch screen thermostat:

_______________________________________________________________

Heating Film Photos:

_______________________________________________________________

Packing:

Package upgrade. 25cm*50cm reflective film randomly presented.

_______________________________________________________________I

Installation Set Photos:

1, Preparing Accessories.

2, Take out the clamp, and wires.

3, Insert wires into clamp.

4, Use a tool to opened the film, find the copper strips.

5, Insert the cable inside of the film but near the copper strips.

(For current transmit).

6, Mount the clamp on the film.

7, Fixed the clamp on the film.

8, Stick the waterproof insulation daub on the clamps.

9, Stick the black insulation tap on the insulation tap.

10, Stick the black insulation daub at copper strips (Another side).