220V/110V 853AA LCD Adjustable Electronic Heat Hot Air Gun PCB preheat and desoldering IR preheating station BGA rework station

USD 147.00/pieceUSD 119.00/pieceUSD 388.00/pieceUSD 195.00/pieceUSD 119.00/pieceUSD 68.00/pieceUSD 119.00/pieceUSD 128.60/piece

Preheat and hot air rework station,853AA Product Description Preheat and hot air rework station,853AA Feature

1.Using microcomputer processor PID programmable temperature control technology

2.Preheating station is to use a glaze layer having a high thermal effect, good thermal shock resistance of the ceramic as the substrate, high-quality nickel branded alloy wire once sintering. It has a high thermal effect, overall good, good thermal stability, uniform heating, high dielectric strength, clean, easy to install and so on features.

3.Air Gun heater use ceramic heater, heating elements firmly wrapped around the model ceramic, rapid and uniform heating. Use the upgraded version fan, the airflow larger than the ordinary fan, spiral out of the wind, long life.

4.The machine has a self-test function, full intelligent over-temperature, short-circuit, open circuit, overload and fault display and protection functions.

5.853AA preheating station using the user-friendly design, the cover affixed with a high-temperature, insulated protection pads to prevent scalding operation. The stent uses magnetic induction technology, card board bracket to prevent protective pads suck hood above, can rotate 360 degrees, flexible card board, it is suitable for the circuit boards of different shapes and sizes.

6.853AA temperature correction function: to adapt to the environmental impact, or replace the heating elements, soldering iron tips etc. spare parts caused by temperature deviation, can use this function calibration temperature. The correction temperature range is -50 °C ~ +50 °C.

7.853AA has Celsius / Fahrenheit temperature display function: meet different market needs to design the temperature display mode, you can choose under customary interest.

Preheat and hot air rework station,853AA display

Preheat and hot air rework station,853AA

Data: Voltage: AC220C±5% Max power consumption: 1200W Preheating station parts: Temperature Range: 50~ 300 °c or 50~400 °c /152~572 °F or 152~752 °F Temperature Stability: ±2 °c Display Type: LED Area: 120*120mm Hot Air Reworks parts Airflow type: brushless fan spiral out wind Air Flow:≤130L/min Temperature Range: 100 °c -480 °c /212°F ~896 °F Temperature Stability: 100 °c -480 °c /212 °F ~896 °F Display Type: LED Handle cable length: ≥100cm Preheat and hot air rework station,853AA General Usage 1). Suitable for de-soldering and soldering BGA, SOIC, CHIP, QFP, PLCC package SMD IC, Particularly suitable for de-soldering BGA module, computer motherboard north and south bridge, all kinds of mobile phone motherboard SMT IC and LED lights. 2). Shrinking, Paint drying, adhesive removal, thawing, warming, Plastic welding etc.